1. Product Identification

Product name:

BODYFIBER   250.06.0000.1

Product type:

Putty  mass based on polyester resin.

2. Chemical

Chemical name of resin

Unsaturated polyester resin

Chemical name of solvent(s):

Styrene.

Form:

Viscous mass.

Color:

Green.

Hazardous ingredients:

Name                CAS-Nr.                Conc.            Symbol            R-Phrases

Styrene             000100-42-5          10-15%         Xn                   R10-20-36/38

3. Hazards Identification

Effects of (over) exposure:

Irritation of skin, eyes and respiratory tract.

Symptoms of (over) exposure

·       Inhalation:

Coughing, headache, dizziness, drowsiness, unconsciousness, nausea and vomiting

·       Skin:

Dry skin, redness.

·       Eyes:

Pain, redness.

·       Ingestion:

Sore throat, stomach-ache, headache, dizziness, vomiting, dullness.

4. First - Aid Measures

Inhalation:

Move to fresh air, rest, half upright position, loosen clothing. Artificial respiration in case of difficulty in breathing. Seek medical advice after significant exposure.

Skin:

Wash with plenty of soap and water immediately. Take all contaminated clothes off immediately. Seek medical advice if irritation develops.

Eyes:

Rinse immediately with plenty of water. Eyelids should be kept away from the eyeball to ensure thorough rinsing. Always seek medical advice.

Ingestion:

DO NOT induce vomiting because of risk of aspiration. Rinse with water.

Seek medical advice.

5. Fire-Fighting Measures

Extinguishing measures

- Suitable:

Powder, carbon dioxide, foam, halon.

Ιn case of larger fires, water spray should be used.

- Not to be used:

High pressure water jet.

Hazardous thermal decomposition and combustion products

- In case of fire toxic fumes might be  formed.

Protective equipment

- Wear protective clothing and use self- contained breathing apparatus.

6. Accidental Release Measures

Personal precautions:

Put on adequate protective equipment. Do not breathe vapour.

Environment precautions:

Keep away from drains, surface-water, ground-water and soil.

Cleaning procedures:

Collect as much as possible in a clean container for disposal.

Cover the remainder with inert absorbent. Dispose according to local regulations.

7. Handling and Storage

Handling:

Keep away from heat. Keep away from sources of ignition-No smoking. Do not breathe vapour. Avoid contact with skin and eyes. Take precautionary measures against static discharges.

Storage:

Keep in cool, well-ventilated place. Take precautionary measures against static discharges.

8. Exposure Controls / Personal Protection

Respiratory protection:

Suitable respiratory equipment.

Hand protection:

Eye protection:

Skin protection:                         

Protective gloves.

Safety goggles.

Protective clothing.

9. Physical and Chemical Properties

-Appearance

Green.

-Autoignition

490°C(styrene)

-Boiling point

Not applicable.

-Flash point

31° C

-Melting range

Not applicable.

-Odour

Styrene- like odour.

-Partition coefficient

Not known.

-pH

Not applicable.

-Relative density

1.45-1.65 g/cm³

-Solubility in water

Not soluble.

-Vapour density

Not known.

-Vapour pressure

7 mbar/20°C (styrene)

-Viscosity

10. Stability and Reactivity

Conditions to avoid:

Ignition sources.

Materials to avoid:

Heating, concentrated acids, metal salts, peroxides can cause polymerization of styrene.

Hazardous decomposition products:

Ignitable gases/vapour.

11. Toxicological Information

- Inhalation:

Low vapour concentrations cause irritation of the respiratory tract, causing. coughing and slight difficulty with breathing. Higher concentrations produce more severe irritation, and may be accompanied by nausea, fatigue, weakness, euphoria, drowsiness, double vision, ataxia and coma.

- Skin:

May produce mild reddening of the skin. Prolonged contact may produce drying and fissuring due to defatting action.  

- Eyes:

Vapour is mildly irritating. Liquid produces chemical conjunctivitis     

with mild transient corneal injury.

- Ingestion:

Slightly toxic. Ingestion of moderate quantities may cause abdominal  discomfort, nausea and drowsiness.

12. Ecological Information

BODYFIBER is almost insoluble in water and will float on the surface. It could cause a fire or explosion if a large spill drained into a sewer system and would be highly toxic to fish if discharged to natural waters. Avoid discharging to sewers or waterways! At a very low water concentration it can be treated in biological wastewater treatment plants. Do not allow to escape into water, wastewater or soil.

13. Disposal Considerations

Methods of disposal:

Controlled incineration.

Danger(s):

Emptied vase contain solvent vapours, hazardous with respect to  fire, explosion and noxiousness. Dispose only to licensed vase reconditioners.

14. Transport Information

Special precautions:

Not applicable

Classification

Xn

- UN no.

1263

- Packaging group

III

- ADR/RID

3

- ICAO/IATA

3

- IMDG-code

3.3

- Stow away from foodstuffs

YES

- Marine pollutant

YES

- Shipping name

PAINT RELATED MATERIAL, FLAMMABLE.

15. Regulatory Information

EEC classification

Reference: 91/155/EEC

 -Contains:

Styrene

- Symbol:

Xn          Harmful.

Risk-phrases:

R10        Flammable. 

R20        Harmful. by inhalation.    

R36/38   Irritating to eyes and skin.

Safety-phrases:

S20/21    When using do not eat, drink or smoke.

S23         Do not breathe vapour.                         

S26         In case of contact with eyes, rinse immediately with plenty of water and seek 

                medical advice.

S51         Use only in well ventilated areas.

16. Other Information

Replaces MSDS dated:

26.07.1997

Product Data Management

ILIAS VASSILIADIS S.A.

570 09 KALOCHORI THESSALONIKI - GREECE

TEL. (031) 751 600 FAX 751 521 TLX 410904 HB GR

The data given here is based on current knowledge. The purpose of this Safety Data sheet is to describe the products in terms of their safety requirements. The data does not imply any warranty with regard to product properties.