|
PRODUCT
: |
BODYFILL
3+1 |
|
PRODUCT
CODE: |
301.03.0000.1 301.07.0000.1 |
SPECIFICATION
CODE: |
QASP020A |
DATE: |
30.10.2001 |
|
System
Description |
2K
acrylic primer. |
|
Shade |
Yellow
or grey. |
|
Application
Field(s) |
2K
filling primer suitable for application on metallic surfaces (e.g.
vehicles). It dries fast, is easy to apply, and it is capable of
withstanding mechanical abuse. |
|
PROPERTY |
UNIT |
DRY FILM THICKNESS [μm] |
MEASUREMENT AFTER |
VALUE |
STANDARD |
|
Specific
gravity |
g/cm3 |
|
|
1.50
± 0.10 |
DIN
53 217 |
|
Maximum
particle size |
μm |
|
|
<10 |
DIN
EN 21 524 |
|
Total
solids (w/w) |
% |
|
|
69
± 5 |
DIN
EN ISO 3251 |
|
Flash
Point |
ο
C |
|
|
29 |
DIN
EN 456 |
|
STORMER
Viscosity (20ο
C±0.5) |
KU |
|
|
90-110 |
|
|
Dry-to-the-touch
(20ο C±0.5) |
min |
100 |
|
15 |
|
|
Full
hardness
(23ο C±0.5) |
hrs |
100 |
|
3 |
|
|
Full
hardness
( 60ο C±2 ) |
min |
100 |
|
20-30 |
|
|
Full
hardness IR |
min |
100 |
|
8-12 |
|
|
Full
hardness according to KOENIG |
sec |
100 |
48
h |
58
±
2 |
DIN
53 157 |
|
Theoretical
Spreading Rate |
m2/l |
100 |
|
6 |
|
MECHANICAL PROPERTIES
|
PROPERTY |
UNIT |
DRY FILM THICKNESS [μm] |
MEASUREMENT AFTER |
VALUE |
STANDARD |
|
Εlasticity
acc. to ERICHSEN |
mm |
100 |
24
h |
>
5 |
DIN
EN ISO 1520 |
|
Bending
test acc. to MANDREL |
o |
100 |
24
h |
0
passes |
DIN
EN ISO 1519 |
|
Impact
Test |
cm |
100 |
24
h |
20 |
|
|
Cross
cut |
GT |
100 |
24
h |
0-1 |
DIN
EN ISO 2409 |
CHEMICAL RESISTANCE
|
PROPERTY |
UNIT |
MEASUREMENT AFTER |
EXPOSURE TIME [hours] |
RESULT |
|
Salt
spray test ASTM B-117-90 |
hours |
24h |
>300 |
Satisfactory |
|
Q-UV |
hours |
|
|
|
|
Water |
hours |
24h |
>24 |
No
change |
|
Motor
Oil |
hours |
24h |
>3 |
No
change |
|
Diesel
Oil |
hours |
24h |
>3 |
No
change |
|
Unleaded
Gasoline (Super) |
minutes |
24h |
>3 |
No
change |
|
ΝαΟΗ
0.5% |
minutes |
24h |
>3 |
No
change |
|
Η2SO4
10% |
minutes |
24h |
>3 |
No
change |
PRETREATMENT AND APPLICATION OF THE MATERIAL
|
Hardener
addition |
Paint
: Hardener = 3: 1 v/v |
||
|
Τype
of hardener |
BODY
HARDENER FAST BODY
HARDENER NOIRMAL BODY
HARDENER SLOW |
Product
Code |
722.00.0000.1 720.00.0000.1 721.00,0000.1 |
|
Thinner
Addition [%] |
10-15 |
||
|
Τype
of thinner |
BODY
ACRYL THINNER NORMAL BODY ACRYL THINNER SLOW |
Product
Code |
740.00.0000.1 741.00.0000.1 |
|
Application
Viscosity DIN 53 211 Cup4 [sec] |
26
- 32 |
Temperature
(23ο C±0.5) |
|
|
Pot
life [min] |
90 |
||
|
Repaintable
after [min] |
20 |
||
|
Mode
of Application |
Spary
gun |
||
|
Spray
Gun Nozzle diameter [mm] |
1.5
– 1.8 (3-4 bar) |
||
|
Suggested
dry film thickness [μm] |
90
– 120 |
||
|
Maximum
Storage Time (months) |
24 |
|
Recommended
Storage Temperature [οC] |
+5
to +25 |
2K
acrylic filling primer. It is overcoatable with all paint systems (DELUXE,
single or two coat acrylics). Thoroughly clean the surface to be painted from
dust, oils and dirt. Mix the filler
with BODY HARDENER NORMAL at a ratio of 3:1 v/v using the mixing stick, adding
10-15% BODY ACRYL NORMAL. Mix well
and filter through the filter paper. Apply the paint with a spray gun having a
nozzle diameter of 1.5 – 1.8 mm. We recommend the thickness of the dry film
does not exceed 90-120 μm, which can be attained by application of two
regular coats. It can be either dry sanded with a P340-400 sandpaper or wet
sanded with a P600-1000 one.
Flammable. Use only in well ventilated areas. Do not eat/drink, avoid any inhalation of vapour and contact with the skin. Keep out of reach of children.