|
PRODUCT
: |
BODYFILL
307 TINTING PASTES |
|
PRODUCT
CODE: |
307.02.0000.1 307.03.0000.1 307.04.0000.1 307.05.0000.1 307.06.0000.1 |
SPECIFICATION
CODE: |
QASP037A |
DATE: |
15.02.2003 |
|
System
Description |
Tinting
pastes for BODYFILL 360 and 307 |
|
Shade |
Black,
yellow, red, blue, green. |
|
Application
Field(s) |
Collored
2K filling primers suitable for application on metallic surfaces (e.g.
vehicles). |
|
PROPERTY |
UNIT |
DRY FILM THICKNESS [μm] |
MEASUREMENT AFTER |
VALUE |
STANDARD |
|
Specific
gravity |
g/cm3 |
|
|
1.00-1.60 |
DIN
53 217 |
|
Maximum
particle size |
μm |
|
|
<5 |
DIN
EN 21 524 |
|
Total
solids (w/w) |
% |
|
|
55-75 |
DIN
EN ISO 3251 |
|
Flash
Point |
ο
C |
|
|
21 |
DIN
EN 456 |
|
STORMER
Viscosity (20ο
C±0.5) |
KU |
|
|
55
– 100 |
|
|
Dry-to-the-touch
(23ο C±0.5) |
min |
|
|
|
|
|
Full
hardness
(23ο C±0.5) |
hrs |
|
|
|
|
|
Full
hardness
( 60ο C±2 ) |
min |
|
|
|
|
|
Full
hardness IR |
min |
|
|
|
|
|
Full
hardness according to KOENIG |
sec |
|
|
|
DIN
53 157 |
|
Theoretical
Spreading Rate |
m2/l |
|
|
|
|
|
|
|
|
|
|
|
MECHANICAL PROPERTIES
|
PROPERTY |
UNIT |
DRY FILM THICKNESS [μm] |
MEASUREMENT AFTER |
VALUE |
STANDARD |
|
Εlasticity
acc. to ERICHSEN |
mm |
|
|
|
DIN
EN ISO 1520 |
|
Bending
test acc. to MANDREL |
o |
|
|
|
DIN
EN ISO 1519 |
|
Impact
Test |
cm |
|
|
|
|
|
Cross
cut |
GT |
|
|
|
DIN
EN ISO 2409 |
|
PROPERTY |
UNIT |
MEASUREMENT AFTER |
EXPOSURE TIME [hours] |
RESULT |
|
Salt
spray test ASTM B-117-90 |
hours |
|
|
|
|
Q-UV |
hours |
|
|
|
|
Water |
hours |
|
|
|
|
Motor
Oil |
hours |
|
|
|
|
Diesel
Oil |
hours |
|
|
|
|
Unleaded
Gasoline (Super) |
minutes |
|
|
|
|
ΝαΟΗ
0.5% |
minutes |
|
|
|
|
Η2SO4
10% |
minutes |
|
|
|
PRETREATMENT AND APPLICATION OF THE MATERIAL
|
Hardener
addition |
Paint
: Hardener = v/v |
||
|
Τype
of hardener |
|
Product
Code |
|
|
Thinner
Addition [%] |
|
||
|
Τype
of thinner |
|
Product
Code |
|
|
Application
Viscosity DIN 53 211 Cup4 [sec] |
|
Temperature
(23ο C±0.5) |
|
|
Pot
life [min] |
|
||
|
Repaintable
after [min] |
|
||
|
Mode
of Application |
Spary
gun |
||
|
Spray
Gun Nozzle diameter [mm] For
tinted filler |
1.5
– 1.8 (3-4 bar) 1.5
(2 bar) |
||
|
Suggested
dry film thickness [μm] For
tinted filler |
80
– 120 |
||
|
Maximum
Storage Time (months) |
24 |
|
Recommended
Storage Temperature [οC] |
+5
to +25 |
Tinting
pastes for BODYFILL 360 and 307.
Flammable. Use only in well ventilated areas. Do not eat/drink. Avoid
any inhalation of vapours and contact with skin. Keep out of reach of children.
Flammable. Use only in well ventilated areas. Do not eat/drink. Avoid any
inhalation of vapours and contact with skin. Keep out of reach of children.