|
PRODUCT
: |
BODYFILL
360 |
|
PRODUCT
CODE: |
360.07.0000.1 |
SPECIFICATION
CODE: |
QASP032A |
DATE: |
28.11.2003 |
|
System
Description |
2K
acrylic primer. |
|
Shade |
Gey. |
|
Application
Field(s) |
2K
filling primer suitable for application on metallic surfaces (small and
through spots of bare steel, unsanded e-coats) BODY poyester putties. |
|
PROPERTY |
UNIT |
DRY FILM THICKNESS [μm] |
MEASUREMENT AFTER |
VALUE |
STANDARD |
|
Specific
gravity |
g/cm3 |
|
|
1.50
± 0.10 |
DIN
53 217 |
|
Maximum
particle size |
μm |
|
|
<7 |
DIN
EN 21 524 |
|
Total
solids (w/w) |
% |
|
|
75
± 5 |
DIN
EN ISO 3251 |
|
Flash
Point |
ο
C |
|
|
24 |
DIN
EN 456 |
|
STORMER
Viscosity (20ο
C±0.5) |
KU |
|
|
75-95 |
|
|
Dry-to-the-touch
(23ο C±0.5) |
min |
100 |
|
15-20 |
|
|
Full
hardness (23ο
C±0.5) |
hrs |
100 |
|
12-16 |
|
|
Full
hardness
( 60ο C±2 ) |
min |
100 |
|
30 |
|
|
Full
hardness IR |
min |
100 |
|
10-12 |
|
|
Recoatable
for “wet wet” |
min |
100 |
|
15-20
max.
8 h |
|
|
Full
hardness according to KOENIG |
sec |
100
(BODYDUR) |
24
h |
58
±
5 |
DIN
53 157 |
|
Theoretical
Spreading Rate |
m2/l |
|
|
4.5 |
|
MECHANICAL PROPERTIES
|
PROPERTY |
UNIT |
DRY FILM THICKNESS [μm] |
MEASUREMENT AFTER |
VALUE |
STANDARD |
|
Εlasticity
acc. to ERICHSEN |
Mm |
100 |
24
h |
>
8 |
DIN
EN ISO 1520 |
|
Bending
test acc. to MANDREL |
o |
100 |
24
h |
0
passes |
DIN
EN ISO 1519 |
|
Impact
Test |
Cm |
100 |
24
h |
80 |
|
|
Cross
cut |
GT |
100 |
24
h |
0-1 |
DIN
EN ISO 2409 |
CHEMICAL RESISTANCE
|
PROPERTY |
UNIT |
MEASUREMENT AFTER |
EXPOSURE TIME [hours] |
RESULT |
|
Salt
spray test ASTM B-117-90 |
hours |
|
|
|
|
Q-UV |
hours |
|
|
|
|
Water |
hours |
24h |
1 |
No
change |
|
Motor
Oil |
hours |
24h |
10
min |
No
change |
|
Diesel
Oil |
hours |
24h |
10
min |
No
change |
|
Unleaded
Gasoline (Super) |
minutes |
|
|
|
|
ΝαΟΗ
0.5% |
minutes |
|
|
|
|
Η2SO4
10% |
minutes |
|
|
|
PRETREATMENT AND APPLICATION OF THE MATERIAL
|
Hardener
addition |
Paint
: Hardener = 2: 1 v/v |
||
|
Τype
of hardener |
BODY
HARDENER NOIRMAL BODYDUR |
Product
Code |
720.00.0000.1 726.00.0000.1 |
|
Thinner
Addition [%] |
0%
for medium film thickness application 20%
for wet on wet application |
||
|
Τype
of thinner |
BODY
ACRYL THINNER NORMAL BODY ACRYL THINNER SLOW |
Product
Code |
740.00.0000.1 741.00.0000.1 |
|
Application
Viscosity DIN 53 211 Cup4 [sec] |
19-24
for medium filmthickness 14-16
for wet in wet application |
Temperature
(23ο C±0.5) |
|
|
Pot
life [min] |
30-45 |
||
|
Repaintable
after [min] |
5-10 |
||
|
Mode
of Application |
Spary
gun |
||
|
Spray
Gun Nozzle diameter [mm] |
1.3
– 1.5 (3-4 bar) medium film thickness 1.3
- 1.4 (3-4 bar) wet on wet |
||
|
Suggested
dry film thickness [μm] |
80
– 120 |
||
|
Maximum
Storage Time (months) |
12 |
|
Recommended
Storage Temperature [οC] |
+5
to +25 |
2K
acrylic filling primer. Suitable for usanded e-coats, small sand through spots
of bare steel, polyester putties. In order to guarantee optimum corrosion
protection, we recommend to coat areas of bare metal including small and through
spots with BODYFILL ETCH PRIMER (#961). Thoroughly clean the surface to be
painted from dust, oils and dirt
with BODY ANTISIL ANTISIL (#770). We recommend the thickness of the dry film
does not exceed 80-120 μm
and 40-50 for wet in wet application. It can be either dry sanded with a
P320-500 sandpaper or wet sanded with a P600-800 one.