|
PRODUCT: |
BODY
SPRAY UNIVERSAL CLEARCOAT |
|
PRODUCT
CODE: |
500.00.0006.0 |
SPECIFICATION
CODE: |
QASL013A |
DATE: |
25.11.2003 |
|
System
Description |
Thermoplastic
Acrylic Aerosol Paint. |
|
Shade |
Transparent. |
|
Application
Field(s) |
For
painting over BODY metallicand fluorescent paints und refresing old
paints. |
CHARACTERISTIC TECHNICAL DATA
PROPERTY
|
UNIT |
DRY FILM THICKNESS [μm] |
MEASUREMENT AFTER |
VALUE |
STANDARD |
|
Specific
gravity |
g/cm3 |
|
|
|
DIN 53 217 |
|
Maximum particle size |
μm |
|
|
|
DIN EN 21 524 |
|
Total
solids (w/w) |
% |
|
|
10-12 |
DIN EN ISO 3251 |
|
Dry-to-the-touch
(20ο Cą0.5) |
min |
45 |
|
7-10 |
|
|
Full
hardness according to KOENIG |
sec |
45 |
24
hrs |
65-75 |
DIN
53 157 |
MECHANICAL PROPERTIES
|
PROPERTY |
UNIT |
DRY FILM THICKNESS [μm] |
MEASURE-MENT AFTER |
VALUE |
STANDARD |
|
Εlasticity
acc. to ERICHSEN |
mm |
45 |
24 h |
>4 |
DIN EN ISO 1520 |
|
Bending
test acc. to MANDREL |
o |
- |
- |
- |
DIN EN ISO 1519 |
|
Stone Hammer Test |
cm |
45 |
24
h |
pass |
|
|
Cross
cut |
GT |
45 |
24 h |
0-1 |
DIN EN ISO 2409 |
PRETREATMENT AND APPLICATION OF THE MATERIAL
|
Mode
of Application |
Spray |
|
Suggested
dry film thickness [μm] |
40-60 |
|
Maximum
Storage Time (months) |
12 |
|
Recommended
Storage Temperature [οC] |
From
+50C to +250C |
Shake
thoroughly before use. Shake for 1-2 minutes after agitator ball has started to
rattle. After preparing the area to be painted ensure it to be free from dirt,
wax, oil etc. Test on a similar surface using a back and forth action. Spraying
at a distance of 25 cm, thinly applied coats built up at 3-5 minutes intervals
will achieve best results. Leave for 24 hours to harden. Optimum operating
range: 100C - 250C.
CAUTION:
Pressurised container. Do not expose to temperatures exceeding 500C.
Do not puncture or incinerate even when empty. Do not spray onto naked flame or
incandescent material.