PRODUCT CODE:

505.09.0000.0

505.00.0000.1

505.01.0000.1

505.03.0000.1

505.04.0000.1

SPECIFICATION CODE:

QASI114

DATE:

17/05/04

 

 

1. Product Identification

 

 

Product name:

 

BODY SPRAY 312, 313, 314, 316, 317

Product type:

Alkyd Aerosol Paint.

 

2. Chemical

 

 

 

Chemical name of solid(s):

Alkyd resin and fluorescent pigments..

Chemical name of solvent(s):

Aliphatic esters and hydrocarbons.

Form:

Spray.

Color:

Fluororescent yellow-green, green, orange-yellow, red, magenta..

 

Hazardous ingredients:

Name                                         CAS-Nr.                Conc.            Symbol            R-Phrases

Light hydrotreated naphtha       064742-49-0           2-10%          F, Xn              R11, 65

Propane                                     000074-98-6           <10%           F+                        R13

Butane                                       000106-97-8           >10%           F+                        R13

 

3. Hazards Identification

 

 

Effects of (over) exposure:

 

May cause sensitization by skin contact.

 

Symptoms of (over) exposure.

 

·       Inhalation:

Short exposure to vapor concentrations of up to 10% v/v in air  causes slight dizziness. Extended inhalation at low concentrations (1% v/v) causes nausea, headache and drowsiness.

·       Skin:

May cause sensitization by skin contact. Contact with the liquefied form causes frostbite.

·       Eyes:

Irritating to eyes. In liquefied form causes cloudy vision and pain

·       Ingestion:

Sore throat, stomach-ache, headache, dizziness, vomiting, dullness.

 

4. First - Aid Measures

 

 

Inhalation:

 

Move to fresh air, rest, half upright position, loosen clothing. Seek medical advice after significant exposure.

 

Skin:

Wash with plenty of soap and water immediately. Take all contaminated clothing off immediately. Seek medical advice if irritation develops.

 

Eyes:

Rinse immediately with plenty of water. Eyelids should be help away from the eyeball to ensure thorough rinsing. Always seek medical advice.

 

Ingestion:

Immediately rinse mouth and then drink plenty of water. Seek medical advice.

 

5. Fire-Fighting Measures

 

 

Extinguishing measures

 

 

- Suitable:

Watermist (only large amounts) to cool down  the surface of can.

 

- Not to be used:

High pressure water jet.

 

Hazardous thermal decomposition and combustion products

Not determined.

 

Protective equipment

- Wear protective clothing and use self- contained breathing apparatus.

 


6. Accidental Release Measures

 

 

Personal precautions:

 

Put on adequate protective equipment. Do not breathe vapour.

 

Environment precautions:

Do not empty into drains.

 

Cleaning  procedures:

Dispose according to local  regulations.

 

7. Handling and Storage

 

 

Handling:

 

Keep product away from heat and sources of ignition. No sparking tools should be used. Do not pierce or burn, even after use.  Do  not spray on naked flame or any incandescent material. Do not breathe spray.

 

Storage:

Keep in cool, well-ventilated  place. Protect from sunlight and do not expose to temperatures exceeding 50°C.

 

8. Exposure Controls / Personal Protection

 

 

 

Respiratory protection:

The usual precautionary measures for handling chemicals should be observed. provide adequate ventilation.

 

Hand protection:

 

Eye protection:

 

Skin protection:                         

 

Protective gloves.

 

Safety goggles.

 

Suitable protective clothing.

 

9. Physical and Chemical Properties

 

 

-Appearance

 

Differnent.

-Autoignition

365°C (butane)

-Boiling point

Not applicable.

-Flash  point

<0°C

-Density:

 

-Melting range

Not applicable.

-Odour

Characteristic.

-Partition coefficient

Not known.

-pH

 

-Solubility in water

No applicable.

-Vapour density

Not known.

-Vapour  pressure

7700 hPa (21°C)

-Viscosity

 Not applicable.

 

10. Stability and Reactivity

 

 

Conditions to avoid:

 

Temperatures higher than 50°C and exposure to sunlight.

 

Materials to avoid:

 

Not known.

 

Hazardous decomposition products:

 

Not known.

 


11. Toxicological Information

 

 

- Inhalation:

 

 

High concentrations have a narcotic effect.

- Skin:

Irritating after prolonged exposure.

 

- Eyes:

Irritating. May cause sensitization by skin contact. Contact with the liquefied form causes frostbite.

 

- Ingestion:

Ingestion of moderate quantities may cause abdominal  discomfort, nausea and drowsiness.

 

 

12. Ecological Information

 

 

Avoid discharging to sewer or waterways.

 

13. Disposal Considerations

 

 

Methods of disposal:

 

 

According to local regulations.

Danger(s):

Emptied vase contain solvent vapours, hazardous in respect of fire, explosion and noxiousness. Disposal only to licensed vase reconditioners.

 

14. Transport Information

 

 

Special precautions:

 

 

Not applicable.

Classification

 

F+

- UN no.

 

1950

- ADR/RID

 

2

- ICAO/IATA

 

3 (-)

- IMDG-code

 

2.1

- Stow away from foodstuffs

 

YES

-Marine pollutant

 

NO

-Shipping  name

AEROSOL PAINT, EXTREMELY FLAMMABLE

 

 

 

15. Regulatory Information

 

 

EEC classification

 

 

Reference:  91/155/EEC

-Contains:

 

 

-Symbol:

 

F+              Extremely flammable.

-Risk-phrases:

R13            Extremely flammable liquefied gas.

 

-Safety-phrases:

S2               Keep out of reach of children.

S3/7/9         Keep container tightly closed, in a cool, well-ventilated place.

S16             Keep away from sources of ignition. -No smoking.    

S23             Do not breathe vapour/spray.

S51             Use only in well ventilated areas.

 

 

16. Other Information

 

 

Replaces MSDS dated:

 

30.10.2001

 

 

Product Data Management

HB BODY, S.A.

NB6 & DA9 str., Block #50, Sindos Industrial Park

THESSALONIKI, GR-57022 - GREECE

TEL. + 30 –2310 - 790000   FAX +30-2310-790015  TLX 410904 HB GR

 

 

The data given here is based on current knowledge. The purpose of this Safety Data Sheet is to describe the products in terms of their safety requirements. The data does not imply any warranty with regard to product properties.