PRODUCT CODE

PRODUCT CODE:

770.00.0000.1

SPECIFICATION CODE:

QASI069

DATE:

30.10.2001

1. Product Identification
Product name:			BODY ANTISIL
Product type:			Mixture of organic solvents.
2. Chemical

Chemical name of solvent(s):			Mixture of aliphatic, aromatic hydrocarbons.
Form:			Liquid.
Color:			Clear.
Hazardous ingredients: Name CAS-Nr. Conc. Symbol R-Phrases White spirt 064742-88-7 50-100% R10 Naphtha (petroleum), hydrotreated light 064742-49-0 25-50% F, N R11-38-65-67-51/53
3. Hazards Identification
Effects of (over) exposure:		Irritation of skin, eyes and respiratory tract.
Symptoms of (over) exposure
· Inhalation:	Coughing, headache, dizziness, drowsiness, unconsciousness, nausea and vomiting.
· Skin:	Dry skin, redness.
· Eyes:	Pain, redness.
· Ingestion:	Sore throat, stomach-ache, headache, dizziness, vomiting.
4. First - Aid Measures
Inhalation:	Move to fresh air, rest, half upright position, loosen clothing. Artificial respiration in case of difficulty in breathing. Seek medical advice after significant exposure.
Skin:	Wash with plenty of soap and water immediately. Take all contaminated clothing off immediately. Seek medical advice if irritation develops.
Eyes:	Rinse immediately with plenty of water. Eyelids should be help away from the eyeball to ensure thorough rinsing. Always seek medical advice.
Ingestion:	DO NOT induce vomiting because of risk of aspiration. Rinse with water. Seek medical advice.
5. Fire-Fighting Measures
Extinguishing measures
- Suitable:	Powder, carbon dioxide, foam, watermist (only large amounts).
- Not to be used:	High pressure water jet.

Hazardous thermal decomposition and combustion products

- In case fire toxic fumes might be formed.

Protective equipment

- Wear protective clothing and use self- contained breathing apparatus.

6. Accidental Release Measures
Personal precautions:		Put on adequate protective equipment. Do not breathe vapour.
Environment precautions:		Keep away from drains, surface-water, ground-water and soil.
Cleaning procedures:		Collect as much as possible in a clean container for disposal. Cover the remainder with inert absorbent.. Disposal according to local regulations.
7. Handling and Storage
Handling:	Keep away from heat. Keep away from sources of ignition-No smoking. Do not breathe vapour. Avoid contact with skin and eyes. Take precautionary measures against static discharges.
Storage:	Keep in cool, well-ventilated place. Take precautionary measures against static discharges.
8. Exposure Controls / Personal Protection
Occupational exposure Standards:			Naphtha hydrotreated light – TLV (TWA): 1400 mg/m³
Respiratory protection:			Suitable respiratory equipment.
Hand protection: Eye protection: Skin protection:			Protective gloves. Safety goggles. Suitable protective clothing.
9. Physical and Chemical Properties
-Appearance			Clear
-Autoignition			Not known.
-Boiling point			Not known.
-Flash point			10°C.
-Density			0.75±0.02 gr/cm³
-Melting range				Not applicable.
-Odour				Benzene- like odur.
-Partition coefficient				Not known.
-pH				Not applicable.
-Solubility in water				Not soluble.
-Vapour density				Not known.
-Vapour pressure				142 mbar(20°C)
-Viscosity				-

10. Stability and Reactivity

Conditions to avoid:

Static discharges.

Materials to avoid:

Strong oxidizing agents

Hazardous decomposition products:

Burning can produce carbon monoxide.

11. Toxicological Information
- Inhalation:	Low vapor concentrations cause irritation of the respiratory tract, causing. coughing and slight difficulty with breathing. Higher concentrations produce more severe irritation, and may be accompanied by nausea, fatigue, weakness, euphoria, drowsiness.
- Skin:	May produce mild reddening of the skin. Prolonged contact may produce a drying and fissuring due to a defatting action.
- Eyes:	Vapour is mildly irritating.

- Ingestion:	Slightly toxic. Ingestion of moderate quantities may cause abdominal discomfort, nausea and drowsiness.

12. Ecological Information

BODY ANTISIL is almost insoluble in water and will float on the surface. It could cause a fire or explosion if a large spill drained into a sewer system and would be highly toxic to fish if discharged to natural waters. Avoid discharge to sewers or waterways! At very low concentration in water(about 10 ppm) is biodegradability in biological wastewater treatment plant.

13. Disposal Considerations
Methods of disposal:	Controlled incineration.
Danger(s):	Emptied vase contain solvent vapours, hazardous in respect of fire, explosion and noxiousness Disposal only to licensed vase reconditioners.

14. Transport Information
Special precautions:		Not applicable
Classification		F
- UN no.		1263
- Packaging group		II
- ADR/RID		3
- ICAO/IATA		3
- IMDG-code		3.2
- Stow away from foodstuffs		YES
- Marine pollutant		NO
- Shipping name		PAINT RELATED MATERIAL, HIGHLY FLAMMABLE.
15. Regulatory Information
EEC classification	Reference: 91/155/EEC
- Contains:
- Symbol:	N, F Dngerous for the environment. Highly flammable.
-Risk-phrases:	R11 Highly flammable. R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
-Safety-phrases:	S16 Keep away from sources of ignition – No smoking. S23 Do not breathe vapour/pray. S25 Avoid contact with eyes. S51 Use only in well ventilated areas. S61 Avoid release to the environment. Refer to special instructions/Safety data sheets.
16. Other Information
Replaces MSDS dated:	10.07.1998 Product Data Management ILIAS VASSILIADIS S.A. 570 09 KALOCHORI THESSALONIKI - GREECE TEL. (031) 751 600 FAX 751 521 TLX 410904 HB GR The data given here is based on current knowledge. The purpose of this Safety Data sheet is to descripe the products in terms of their safety requirements. The data does not signify any warranty with regard to the products properties.