PRODUCT CODE

PRODUCT CODE:

980.03.0000.1

980.07.0000.1

SPECIFICATION CODE:

QASI022

DATE:

30.10.2003

1. Product Identification
Product name:			BODY 980
Product type:			Fast drying 1K filling primer based on alkyd resin.
2. Chemical

Chemical name of solid(s):			Short oil, chain stopped alkyd resin based on Soya bean fatty acids, refined minerals.
Chemical name of solvent(s):			Mixture of aromatic hydrocarbons and aliphatic ester.
Form:			Viscous liquid.
Color:			Yellow, grey.
Hazardous ingredients: Name CAS-Nr. Conc. Symbol R-Phrases Xylene 001330-20-7 10-25% Xn R10-20/21-38 Toluene 000108-88-3 10-25% Xn, F R11-20 Isobutyl acetate 000110-19-0 2.5-10% F R11
3. Hazards Identification
Effects of (over) exposure:		Irritation of skin, eyes and respiratory tract.
Symptoms of (over) exposure
· Inhalation:	Coughing, and vomiting.
· Skin:	As a result of absorption through the intact skin, the substance may cause systemic light toxic effect, dry skin, redness.
· Eyes:	Pain, redness.
· Ingestion:	Sore throat, stomach-ache, headache, dizziness, vomiting, dullness.
4. First - Aid Measures
Inhalation:	Move to fresh air, rest, half upright position, loosen clothing. Artificial respiration in case of difficulty in breathing. Seek medical advice after significant exposure.
Skin:	Wash with plenty of soap and water immediately. Take all contaminated clothing off immediately.
Eyes:	Rinse immediately with plenty of water. Eyelids should be kept away from the eyeball to ensure thorough rinsing. Always seek medical advice.
Ingestion:	DO NOT induce vomiting because of risk of aspiration. Rinse mouth with water. Seek medical advice.
5. Fire-Fighting Measures
Extinguishing measures
- Suitable:	Powder, carbon dioxide, foam, watermist (large amounts only).
- Not to be used:	Not applicable.

Hazardous thermal decomposition and combustion products

- In case fire toxic fumes might be formed.

Protective equipment

- Wear protective clothing and use self.

6. Accidental Release Measures
Personal precautions:		Put on adequate protective equipment. Do not breathe vapour.
Environment precautions:		Keep away from drains, surface-water, ground-water and soil.
Cleaning procedures:		Collect as much as possible in a clean container for disposal. Cover the remainder with inert absorbent. Disposal according to local regulations.
7. Handling and Storage
Handling:	Keep away from heat. Keep away from sources of ignition-No smoking. Do not breathe vapour. Avoid contact with skin and eyes. Take precautionary measures against static discharges.
Storage:	Keep in cool, well-ventilated place. Take precautionary measures against static discharges.
8. Exposure Controls / Personal Protection

Respiratory protection:			Suitable respiratory equipment.
Hand protection: Eye protection: Skin protection:			Protective gloves. Safety goggles. Protective clothing.
9. Physical and Chemical Properties
-Appearance			Beige, grey.
-Autoignition			480°C.
-Boiling point			Not applicable.
-Flash point			6°C
-Density			1.20±0.10 gr/cm³
-Melting range				Not applicable
-Odour				Organic solvent - like odour.
-Partition coefficient				Not known.
-pH				Not applicable.
-Solubility in water				Not soluble.
-Vapour density				Not known.
-Vapour pressure				Not known.
-Viscosity			100±10 KU (23°C)

10. Stability and Reactivity
Conditions to avoid:					Static discharges, excessive heating.
Materials to avoid:					None.
Hazardous decomposition products:					Burning can produce carbon monoxide.

11. Toxicological Information
- Inhalation:	Low vapour concentrations cause irritation of the respiratory tract, causing. coughing and slight difficulty with breathing..
- Skin:	May produce mild reddening of the skin..
- Eyes:	Vapor is mildly irritating, may cause reddening.

- Ingestion:	Slightly toxic.
12. Ecological Information

Body 980 is almost insoluble in water and will float on the surface. It could cause a fire or explosion if a large spill drained into a sewer system and would be toxic to fish if discharged to natural waters. Avoid discharge to sewers or waterways! It is biodegradable in very low concentrations in water (about 10 ppm) in biological wastewater treatment plants.

13. Disposal Considerations
Methods of disposal:	Controlled incineration.
Danger(s):	Emptied vase contains solvent vapours, hazardous with respect to fire, explosion and noxiousness Dispose only to licensed vase reconditioners.

14. Transport Information

Special precautions:

Not applicable.

Classification

Xn, F

- UN no.

1263

- Packaging group

III

- ADR/RID

- ICAO/IATA

- IMDG-code

3.2

- Stow away from foodstuffs

YES

- Marine pollutant

YES

- Shipping name

PAINT (CONTAINING A FLAMMABLE SOLVENT)

15. Regulatory Information

EEC classification

Reference: 91/155/EEC

- Contains:

Toluene, Xylene.

-Symbol:

Xn Harmful.

F Highly flammable.

-Risk-phrases:

R10 Highly flammable.

R20 /21 Harmful by inhalation and in contact with skin.

R38 Irritating to skin.

-Safety-phrases:

S16 Keep it away from sources of ignition. - No smoking.

S20/21 When using do not eat, drink or smoke.

S23 Do not breathe spray/vapour.

S24/25 Avoid contact with skin and eyes.

S29 Do not empty into drains.

S51 Use only in well ventilated areas.

16. Other Information

Replaces MSDS dated:

30.10.2001

Product Data Management

HB BODY, S.A.

NB6&DA9 str., Block #50, Sindos Industrial Park

THESSALONIKI – GREECE, GR-57022

TEL. +30-2310-790000 FAX +30-2310-790015 TLX 410904 HB GR

The data given here is based on current knowledge. The purpose of this Safety Data Sheet is to describe in terms of their safety requirements. The data does not imply any warranty with regard to product properties.