|
PRODUCT
(S): |
BODY
SPRAY 900 CAVITY WAX |
|
PRODUCT
CODE: |
513.00.0000.1 |
SPECIFICATION
CODE: |
QASL018A |
DATE: |
30.10.2001 |
|
System
Description |
Aerosol
Paint. Combination of wax, synthetic resin and anticorrosive compounds |
|
Shade |
Transparent. |
|
Application
Field(s) |
For
the interior and recessed parts of a car body, the inside of the doors,
and engine compartment and the headlight interiors. |
CHARACTERISTIC TECHNICAL DATA
PROPERTY
|
UNIT |
DRY FILM THICKNESS [μm] |
MEASUREMENT AFTER |
VALUE |
STANDARD |
|
Specific
gravity |
g/cm3 |
- |
- |
|
DIN
53 217 |
|
Maximum
particle size |
μm |
- |
- |
|
DIN
EN 21 524 |
|
Total
solids (w/w) |
% |
|
|
20-25 |
DIN
EN ISO 3251 |
|
Dry-to-the-touch
(23ο C±0.5) |
min |
200-400 |
|
30-40 |
|
|
Full
hardness according to KOENIG |
sec |
|
|
|
DIN
53 157 |
MECHANICAL PROPERTIES
|
PROPERTY |
UNIT |
DRY FILM THICKNESS [μm] |
MEASUREMENT AFTER STOVING
TIME |
VALUE |
STANDARD |
|
Εlasticity
acc. to ERICHSEN |
mm |
|
|
|
DIN
EN ISO 1520 |
|
Bending
test acc. to MANDREL |
o |
|
|
|
DIN
EN ISO 1519 |
|
Stone Hammer Test |
mm |
|
|
|
|
|
Cross
cut |
Gt |
|
|
|
DIN
EN ISO 2409 |
PRETREATMENT AND APPLICATION OF THE MATERIAL
|
Mode
of Application |
Spray |
|
Suggested
dry film thickness [μm] |
200-400 |
|
Maximum
Storage Time (months) |
12 |
|
Recommended
Storage Temperature [οC] |
From
+50C to +250C |
Specially
formulated anticorrosive dispersion, containing wax, synthetic resins and
anticorrosive compounds. It protects from moisture and it is recommended for the
interior and recessed parts of a car body, the inside of the doors, and engine
compartment and the headlight interiors. It penetrates into hard to access
points, forming a transparent protective membrane. It dries fast without
cracking or hardening. It retains its elasticity even at temperature extremes.
There’s no adhesion problem, even if there’s moisture on the waxed surfaces.
It is not repaintable.
REMARKS: Waxing is done after painting. If some exterior parts of the car are inadvertedly smeared with wax, it can be removed with a dry shirt on the spot or a few days later. Petroleum or a light thinner can also be used for cleaning.
CAUTION:
Pressurised container. Do not expose to temperatures exceeding 500C.
Do not puncture or incinerate even when empty. Do not spray onto naked flame or
incandescent material.